heating system

Is A Heat Pump In The Future? 5 Key Features To Assess

Is A Heat Pump In The Future? 5 Key Features To Assess

Air Specialty Heating Systems and Heat PumpsA heat pump is an excellent option for home comfort management in the Mobile area. Because winters are mild, a heat pump can provide safe and effective heating during the winter and cooling during the summer. As you begin to look at new systems, read through the following five features in order to help you  assess your needs and options.

1. Efficiency Ratings

A heat pump is rated for both heating and cooling efficiency. You will find that high-performance units take today’s efficiency levels to new heights. Cooling efficiency is identified as SEER, the seasonal energy efficiency ratio. In 2006, this was raised from 10 to 13 as a minimum requirement in newly manufactured equipment. Effective in January 2015, the minimum SEER in new systems for areas other than the northern region of the country was raised to 14. Similarly, the minimum HSPF, heating seasonal performance factor, has increased from 7.7 to 8.2. Budget-friendly units are available at the lower end of this rating spectrum. However, high-performance pump systems offer more than 20 SEER and 13 HSPF. As you make a decision about your next system, you will want to balance your desire for energy efficiency with your budget for new equipment.

2. Compatibility for Hybrid Heating

Natural gas is used for heating nearly one-third of Alabama homes. Although average lows are in the 40s during the winter, record lows have dropped to sub-zero levels. On these rare occasions, an air-source pump system may struggle to efficiently heat. Combing the pump system with a compatible furnace can be ideal for ensuring the most efficient heating source based on the outside conditions. If you have a furnace, you may want to consider heat pump installation as part of a hybrid heating configuration.

3. Indoor Air Quality

Living near the Gulf Coast, you may struggle with humidity levels inside your home. Even during the winter months, outside humidity levels exceed 60 percent. Recommended indoor humidity is between 30 and 50 percent, but a moist climate makes it difficult to mitigate high levels. Humid air will make you feel warmer and more uncomfortable. You’ll also find that a humid home can create problems with mold and mildew. Health and your quality of life can be affected by poor indoor air quality because of excessive moisture. Your cooling system provides dehumidification activity, important for drawing moisture from your indoor air supply. Unfortunately, it is impractical to operate your cooling equipment when temperatures are mild. As you research new pump systems, you will want to investigate those options that include enhanced dehumidification solutions. Systems like the Infinity 20 from Carrier provide optimum dehumidification, using lower speeds to minimize cooling activity while maximizing the removal of moisture from the indoor environment. This allows you to gain greater control over your home’s air quality.

4. Adaptive Technology

Older systems tend to operate at set output levels, making it difficult to achieve the ideal comfort level in a home. Temperature levels are registered at the thermostat, and hot or cold air is distributed until this level is reached. In many cases, portions of a home will experience major temperature changes between system cycling. However, pump systems with adaptive technology can adjust based on indoor conditions, adjusting fan and compressor speeds to ensure that output is only as much as needed. The Infinity 20 system, for example, can range from 40 to 100 percent, providing only as much heating or cooling as needed. Not only does this ensure optimum comfort, but it also allows for more efficient use of energy. Further, you may experience fewer heat pump repairs because of less intense equipment activity.

5. Life Expectancy of a System

As you think about a new heat pump installation, you may want to compare the remaining life of your existing equipment to the potential benefits of a new unit. You can expect a new unit to last for nearly 15 years, especially if the unit has been carefully maintained. If you are experiencing more frequent heat pump repair needs in spite of good maintenance, a new unit may save you from expensive future repairs. If you considering a heat pump or want to find out how a heat pump would work in your home, call Air-Specialty.
What Should You Tackle Before Upgrading a Heating System?

What Should You Tackle Before Upgrading a Heating System?

upgrading a heating systemWhen you’re upgrading your home heating system, you certainly want a reliable unit that will heat your living spaces comfortably without bankrupting your energy budget. However, even a superior high-efficiency heating system cannot accomplish these goals alone. Keep reading to learn how to make wise investment decisions before upgrading a heating system.

Home Energy Audit

Before upgrading a heating system, take a look at the energy efficiency of your home. Your new heating system will have a difficult time keeping you comfortable if insulation is sub-par and air leaks allow heating dollars to escape. A home energy audit is a process that identifies where your home uses energy and evaluates how and where energy can be saved. This includes sealing air leaks in the home shell and taking a good look in the attic and walls to ensure your home is properly wrapped up with enough insulation. Moreover, home efficiency upgrades may lower the size of heating system needed.

Qualify Your HVAC Professional

There are many decisions to make when installing a new HVAC system. Choosing the right HVAC professional to work with is at the top of the list. You rely on the knowledge and integrity of an HVAC professional to make important investment decisions regarding system sizing and selection, choosing add-on equipment, installation and ongoing service. Your HVAC professional should employ credentialed technicians and carry applicable licenses, bonding and insurance for your protection.

HVAC Sizing

Why pay more money for an oversized heating system? Unfortunately, many homeowners do just that. Some HVAC contractors install larger systems than necessary for good measure, while others don’t possess the skills or take the time to perform an accurate load calculation of the home. Make sure your HVAC contractor performs a load calculation of the home to exact specifications using industry-standard Manual J, and sizes the new heating system using Manual S. Make good decisions before upgrading a heating system in your Mobile home and enjoy the benefits year after year. For HVAC expertise and service you can trust, contact Air Specialty.
Carrier FAD NATE Certified BBB 24/7 Emergency Services